I recently bought a used mini, and it shoots great. But when you first power the gun on eyes on or off, it will not shoot untill I pull the trigger about 10-15 times. After that it shoots fine. I have changed the battery, cleaned and made sure the board was connected right. Is this how they all are or is there a known issue or solution?

Sounds like the noid is sticking. Set the board back to factory default and when you clean the noid use rubbing alcohol. After that leave the noid dry.

__________________

Welcome to IOG, Twade22!

Check this thread out for your fix

*The Ultimate How To Fix Your Mini Thread*

__________________

I have the same thing going on with mine. I clean it and not lubed it (solenoid), new battery etc...sometimes I would have to pull the trigger about 100 times before it would activate! I upped the dwell to 34 blinks instead of 28 and it seems to activate better. If the guns sits for a couple weeks I might have to pull the trigger 5-10 times instead of "1 million"!
Maybe that will help...
ps. you can always turn it back to 28 blinks after it activates, right, it does have to stay like that. It's kind of a Skuzi/Macgyvered first shot drop off!!

__________________
I thought I was invisible!

Thanks guys ill give it a try

and remember no lube at all on the noid

All right, I pulled the noid, cleaned it and now it fires on the first trigger pull.

Now let it sit for a couple of days and then try it...I had mine all clean up, work fine, the gun sat for a few days and I went for a game I couldn't get it to click. I had to pull the trigger 5 million times...

__________________
I thought I was invisible!