would like to know whats the best sitting for the dwell and closing dwell! and the debounce and the anti mech bounce and the anti breechbounce and the anti bolt stick
this is what i have sit right know!
dwell 12.0
closing dwell 18.0
debounce 03.0
anti mech bounce highest
anti breechbounce high
Reson for asking cause I am shooting 68/4500 at 15bps and 270psi and the gun hicups and when i turn the rate of fire from 15bps to 12 bps it hicups even more would like to help please let me know guys!

__________________

I know Hitower has one of these boards so he should be able to help you out.

__________________

Wait...where are you at 270 PSI? Your tank output or does the gauge on the reg say that?

__________________

Are you sure you're running at 270 PSI? Maybe you mean FPS?
You will have issues if your reg is set to over 200 PSI. I run mine at a hair under 200.

__________________

Does it go away if you reset your setting back to default? Sounds like the bolt is not cycling fully.

__________________

My board does the same thing. I chalked it up to the board keeping up with a solid ROF but trying to shoot faster. I haven't put too much into it. It does it with my stock bolt and TechT Gold MRT bolt. My board is set to 13 BPS and it will only show it goes up to 12.9 BPS. When I bump the spend just above 13 BPS it shoots 13.1 BPS. I take it the board doesn't like 13 BPS. I run stock settings for now and haven't tried tuning it yet. I may call Virtue and see what they have to say. I just tried it at 20 BPS and you can still hear it.

__________________

We have a noshow here.... LOL

__________________