i thought maybe it was the hopper not feeding fast enough but i dont know. The paint is breaking before it leaves the barrel i cleaned everything and re lubed all parts and checked o rings. First time i used it. Worked with no problems. Played on the field 3rd go around it started tearing paint up. Im using a .691 back and i was using the stock barrel both were blending.i dont know whats wrong. Please help.

How does the bumper on the front bolt look?

__________________

How brittle was the paint?

__________________

how cold was it also?

question #1 good shape.
Question #2 brand new draxxus paint
Question #3 about 48 f.

I think i fixed the issue, i had to turn the hopper speed up. I didnt think i was firing semi automatic that fast. BUT i wasnt breaking any paint in the chamber after and i think it kept up.
I had a couple of breaks after in the barrel, but i forgot to turn the eyes on.
So i think the problem is fixed. Supposed to be nice and warm tomorrow on the field. Hopefully i wont have another issue.

new paint as in it is pretty good not that brittle. It was stored in room temp. I will give a update tomorrow on how it shot on the field

Also after all the breaking make sure your eyes are clean

__________________
IF YOUR UNDER 18 AND PAY FOR YOUR OWN GEAR PUT THIS IN YOUR SIGNATURE

I'm a Christian baller. Put this in your sig. if you are too.

I figure it out. Two reasons, one the way i was instructed to turn the gun on was WRONG. I was turning eyes off. I shoot pretty fast on semi. AND The barrel i was using.. long story short the guy i ordered from added a adapter without telling me. The back piece had a gap where the adapter was. Therefore breaking/rupturing. I had a really successful game this weekend though. One break all day.