Ok i got the inver mini players part kit in the mail. I took my mini apart and put in the new poppet that came with the kit and it started to leak. I took it out and put my old poppet in and it stopped the leak.

So i need help finding out why this new poppet wont work in my mini.?

I didnt do anything to the new poppet i only put it in. I did noticed that it seems longer than the old poppet and that the white piece on top was considerably larger than the old one. Could this be a factor? I had assumed my old poppet was just worn down.

Did you push the new poppet all the way in to make sure it was seated?I assume the new poppet came with an oring already installed?

__________________
Help my friend

DoW-Outlaw Squad

Yes it did and i push it in as far as it would go with my hand then i turned the velocity screw all the way up to seat it properly and then unscrewed it out about 1 turn and it started leaking and with the new poppet in the velocty screw would leak a little until i unscrewed it a bit then the one leak would stop. But the leak inside the gun would still be leaking.

Im sorry about my spelling i was mad. But ive calmed down. If pictures of both poppets would help then i will gladly post them.

Make any difference if you dry fire it?

__________________
Help my friend

DoW-Outlaw Squad

nope none at all. I dry fired it about 20 times turned it off tried to reset the poppet with the velocity screw and nothing still was leaking...This is killin me.

If it leaks with the new poppet and not the old one, there is a slight chance that the new poppet is damaged.Check the face and make sure theres no lube on the face either.You could also try resetting the solenoid.
ZDS Paintball - Invert Mini Disassembly Pictures

__________________
Help my friend

DoW-Outlaw Squad

why would resetting the solenoid help?

Ok i give up.i tried putting in the new poppet again and it jsut made things alot worse. It still leaked couldnt fix the new poppet.

Well i put in my old poppet and reset it and now its leaking!!! I reset it and it stops it but now i have to reset the poppet everytime i put my tank in. I honestly am sick of my mini now thinking of selling it.

You really need to step back and count to ten.

Reset the board first. I posted a link to the manual that is listed in the TECH help forum in your other thread.

Since you purchased your marker used and have no idea how well it was maintained, I would suggest you replace all of the orings in your marker.

__________________