My mini is leaking enormous amounts of air out the barrel if I try to reset the noid by pulling the trigger 50+ times sometimes it will stop until I pull the trigger again then the same old leak out the barrel and the bolt will slide about half way out. This is happening weather I am dry firing or trying to fire paint eyes on or off. I have cleaned the noid, replaced every o ring, installed a new batter, and cleaned the poppet & seat. Even if I screw the poppet all the way in it still leaks but slower

check ur poppet seal for damage, and if u have one extra replace it

Did that but thanks!

Odd. Haven't heard this depth of a problem. Might want to talk to Kee about getting it fixed.

__________________

Shoot theboss33 an PM he might be able to help you diagnose your problem

Try resetting the noid by screwing all the way in the velocity screw and then back it out 3.5 turns.

Does the poppit have a spring behind it? If not, then get a new one. The older Mini's poppit did not come with this spring.

__________________

Im assumeing you mean reset the poppit? going on that assumption did that and yes mine has the spring but thanks

Woops, yes that's what I meant.

Is your Mini brand new?

__________________

no not new but not that old got it last fall

Did you resolve this issue yet?

__________________