Hi!

i have problems with my mini... i can't get the velocity over 250fps


i have changed all the o-ring on the bolt and boltguide, changed the poppet and the o-ring on it, tried a new fresh battery.

using stock bolt and spring, runnit @ 200psi with the backcap 2.5 turns out...

please help

Tried resetting your board to factory?

__________________

Was your tank screwed all the way in? Without a New Designz thread saver, I've heard that sometimes it helps to fire a shot or two (unloaded of course) to help screw in the tank all the way.

__________________

tried reset the board... using empire relay on/off soe yes the tank is screwed all the way in.... i can't hear any leaks anyway either....

but im going to try change all internal o-rings

did't help...

more sugesstions?

Try a different tank just to make sure it's not your tank's regulator.

If you've changed all of the internal orings and none look damaged and you don't hear any leaks then it should work.

__________________

tried 3 different tanks.. still no succes... the strange thing is if i lower my regulator to 160 i got the same fps...

That IS strange. I'm sorry but at this point I'm going to recommend sending it in to them because it could be an issue with your ASA which is not serviceable.

Hmm, you wouldn't have access to another Mini's ASA would you?

__________________

give theboss33 a shout he might beable to help out link

yeah i do have, im using the on/off on mine, soe i have the original...

tried that out, but same problem

yeah im goin to give boss a mail

thx for ur help, if i finds out why i will post