|
|||||||
This is a discussion on O-Ring Monkey Kit! within the Tech Help section, part of the Invert Marker Section category; More troubles! I just got an o-ring kit from them and the smallest ring wont fit the air tubes like ...
![]() |
|
|
LinkBack | Thread Tools | Display Modes |
|
#1
|
|||
|
|||
|
More troubles!
![]() I just got an o-ring kit from them and the smallest ring wont fit the air tubes like I need them. It goes around the male tube perfectly, but won't fit in the female tube. Help, please?
|
|
#2
|
||||
|
||||
|
have u tried using a very light coat of oil on the o-ring to help work the male half inside the female half?
|
|
#3
|
|||
|
|||
|
I thought so, too.
I used some SP Sleek and it was also tough to put on. What's up with that? |
|
#4
|
||||
|
||||
|
I guess they are a little bit thicker than the stock ones... I guess because of those leaks you mentioned. lol
|
|
#5
|
||||
|
||||
|
hmmm..... when i replaced mine with the one from the Invert players kit it worked like a champ. wonder if theres a diff b/w rings?
|
|
#6
|
|||
|
|||
|
Probably. Too much thicker, actually.
|
|
#7
|
||||
|
||||
|
__________________
Want custom grips designed? Check here for free custom designs.
Check out all of my work at www.photobucket.com/hootgripdesigns |
|
#8
|
|||
|
|||
|
It's #48.
|
|
#9
|
||||
|
||||
|
Oh....thats the red ring, isn't it?
__________________
Want custom grips designed? Check here for free custom designs.
Check out all of my work at www.photobucket.com/hootgripdesigns |
|
#10
|
||||
|
||||
|
Yep, its red.... Bottom Air Tube/Red: 4.72 x 1.88mm Bn70
(this is irrelevant since the manual doesnt list o-rings, but here is a link if anyone wants it for the mini manual... http://info.paintball.ru/files/manuals/marker/mini.pdf) Last edited by G-FOURce; October 4th, 2009 at 08:49 PM. |
![]() |
| Thread Tools | |
| Display Modes | |
|
|