|
|||||||
This is a discussion on Ahgh! A leak! within the Tech Help section, part of the Invert Marker Section category; i have a leak in my mini its barely audible and i dont know where its coming from. any suggestions?...
![]() |
|
|
LinkBack | Thread Tools | Display Modes |
|
#1
|
||||
|
||||
|
i have a leak in my mini
![]() its barely audible and i dont know where its coming from. any suggestions?
__________________
New Kent Paintball Field Sargent
|
|
#2
|
||||
|
||||
|
Hmm... Try taking off your grips (just the rubber, not the whole frame.) and putting windex (works really well) or soapy water on the tube where it connects together, at the reg, and at the body....
If that doesnt work, try replacing o-rings on the bolt guide. and bolt. Then report back hopefully we can find it.
|
|
#3
|
||||
|
||||
|
k thanks man
__________________
New Kent Paintball Field Sargent
|
|
#4
|
||||
|
||||
|
hey, let us know if you find the leak.
__________________
|
|
#5
|
||||
|
||||
|
__________________
|
|
#6
|
||||
|
||||
|
here's a sure way to find it...
fill your bathtub with water (hot or cold, it wont really matter), then air up your marker and submerge it. see the bubbles? thats the leak! . . (this is a joke... do NOT do this!!!)
__________________
Last edited by Big Daddy; October 19th, 2009 at 09:06 AM. |
|
#7
|
||||
|
||||
|
I completely missed the red...
|
|
#8
|
||||
|
||||
|
i havent found it yet. it sounds like its coming from the feed neck area. and now not only do i have a leak, my gun wont shoot! all the shots just drop out the barrel.
*sigh*
__________________
New Kent Paintball Field Sargent
|
|
#9
|
||||
|
||||
|
Update your poppet... (unscrew the back cap and look inside.. there is a brass thing, take it out and compare it to this picture...
(Taken from a guy on pbnation.) the gens go from from left to right, gen1 gen2, gen3 respectively. |
|
#10
|
||||
|
||||
|
where can i get a gen 3?
or 2
__________________
New Kent Paintball Field Sargent
|
![]() |
| Thread Tools | |
| Display Modes | |
|
|