I just upgraded the solenoid and bolt on my TM-15.
I dropped the dwell a few ms' and test fired it.
Using a hi-pressure Nitro tank and observing the gauge on the gun at 200psi, the marker appears not to be recharging as fast as I see the balls drop lower and lower. I changed the battery and still same result.
Should I switch back to a low pressure tank? I originally use a 118ci tank with a raptor regulator set to 300psi.
Could I have a faulty solenoid from BT also?

Any help would be greatly appreciated.

Joe

What kinda bolt? Normally aftermarket bolts cause issues.

__________________

Put your stock bolt back in and see if that corrects it. If it doesn't then it could be tank but not because it is a low or high pressure tank. The tank's regulator might need some mainenance.

__________________

Welcome to IOG!

What was wrong with your old NOID? Did it work fine and not exhibit any of the said issues BEFORE you upgraded it?

I second the comments above. Take the marker back to stock and test.

__________________

third-ed the above comments go back stock and upgrade piece by piece, you'll find your culprit

He'll probably find Kanuck.

__________________

oooooohhhhhhhhhh Tigar!

I get no respect around here... NO respect

DO let us know how you make out with your marker, Joe.

__________________

I guess that's what you get for grabbing tigar's tail thinking it's a story for your kind.

__________________

I used the Tech MRT Bolt and the BT TM-15 Solenoid upgrade.
Thanks for your input guys, will keep you posted.